Crafts sanya daga kwali ga yara

Halitta yana taimakawa wajen bunkasa tunanin, tunanin, tunani - wannan gaskiya ne. Kuma yana yiwuwa a koya wa yaro ga siffofin da ya fi sauƙi tun daga lokacin da ya tsufa, misali, tare da yin abubuwa masu sauki da aka yi da kwali da takarda mai launi ga yara. Bugu da ƙari, wannan hanya ce mai kyau ta tashar wutar lantarki a cikin tasiri mai kyau, kuma ta amfana daga ayyukan haɗin gwiwar.

Yin sana'a na yara na katako yana buƙatar ƙwarewa daga ƙwararrun ƙwararrun - ba abu mai sauƙin sauƙaƙe na katako tare da yatsun yatsun ba, don haka zai buƙaci taimako, musamman ma a farkon matakai na koyon yadda za a yi takarda.

Don yin samfurori da kyau da kyau, amfani da wasu shawarwari masu sauki:

• don tabbatar da cewa shinge suna da santsi, adadin wuta yana da kyau sosai, kuma gefuna suna da santsi, amfani da abin da ake kira trowel, wanda zaka iya latsa kwali zuwa farfajiyar aiki yayin da kuka kunsa. Za a iya yin shi daga karamin takalmin ko ƙugiya maras muhimmanci;
• Don ƙarin gluing mafi dacewa da abin dogara kana buƙatar shafa kayan aikin manne da aka glued. Idan akwai wajibi ne don haɗa nau'i biyu na nau'o'in daban, ana lalata shi da maniyyi na manne;
• don gluing guda na katako ne mafi alhẽri don amfani da babban manne ma'aikata.

Crafts daga kwali "Machines"

Tabbas, motoci sune mafi mahimmanci dalilai na sana'a na katako don yara. Muna ba ku umarnin mataki na gaba daya akan yin na'ura mai motsi daga kwali da sassaukarwa.

Muna buƙatar:

• salo na sassaukarwa;
• wani sashi na kwali na launin launi;
• m;
• almakashi;
• matsakaicin tasiri;
• daɗa biyu mai gefe;
• Alamar alama;
• kidan satin.

Ayyukan aiki

1. A kan takardar zane mai launin zane mun haƙa hanya mai kyau daga kwandon kwalliya kuma a bisansa tare da zane-zane guda biyu muna nuna alamar rarraba. Mun yanke bishiyoyi da tsummoki daga kwalliyar kwalliya da sassauci kuma sun hada su zuwa tushe.
2. Ta yin amfani da wutsiyar katako, za mu yanke tsakiyar tsakiyar madaidaicin zane-zane, wanda girmansa ya dace da girman girman hanya.
3. Daga flexiks mun yi rubutun-rubutu - da farko zana zane a kan takarda, sa'an nan kuma canja wurin alamar alama ga sassin. Muna yin ja windows, bumpers, hasken wuta. A bangarorin biyu mun haɗa nau'i na sakon satin, tsawon kowannensu ya zama daidai da tsawon hanya. A ƙarshen tef mun haɗa nau'i daga sassan.
4. Ana kwashe gwanin kwando na kwalliya zuwa hanya domin a tsakiyar babu wuraren da aka glued ta hanyar da aka miƙa ta. Domin na'urar ta "tafi", dole ne a cire a ƙarshen tef. A ƙarshe, shi ya bayyana cewa irin wannan labarin.

Crafts daga kwali "Gidaje"

Don gina gidaje wajibi ne:

• akwatin kwance;
• zane mai launin launi;
• takarda mai launi;
• matsakaicin tasiri;
• almakashi;
• Alamar alama;
• m.

Ayyukan aiki:

1. Yanke akwatin a cikin rabin halulu tare da wuka.
2. Mun yanke ƙofofi da windows.
3. Wuraren gidaje suna kwance tare da takarda mai launi.
4. Daga katako mai launi muna yin rufin.
5. Dukan cikakkun bayanai an haɗa su tare, zanen facade da rufin tare da alamar. Gidan yana shirye.

Aikin hannu daga kwali "Tiger"

Don yin tiger, muna buƙatar:

• orange kwali;
• Alamar alama;
• m;
• almakashi.

Ayyukan aiki:

1. Daga katako mun cire wadannan blanks.
2. Na farko za mu hada gungumen a cikin hanyar mazugi, to sai ku manne da takunkumi kuma ku kai zuwa gare shi. Alamar alama ta jawo fuska da ratsi. Tigun yana shirye.